Origami Tree Ornaments

These fun 3D paper diamond ornaments don't take long to make. Start with the side of paper you want to show, side up on the table, and fold it diagonally in half, one direction and then another to make a big "X".

 Then put the fight side down and fold the paper in half horizontally, open it, and then fold it in half half again, vertically to make a cross (or plus sign)

With the right side up, push in on opposite diagonals until a square (1/4th of the paper size) is formed and push down

Keep the open side pointed towards you on the table. 

Bring the top right folded edge to the center line, making sure there is a point at the top, and then crease. Repeat on the left to make a kite shape, and then flip it over and repeat on the that side. You should end up with an upside down diamond shape. 

Slide your finger into one of the into one of the of the side folds to open it up in a cone. You are basically moving one of the inner folds to the opposite sides.

 

Once every fold alternates in and out, in and out, going around, cut off the bottom part of the triangle, which is the back of the paper, leaving only the long triangle. Then take each corner on an outward fold and push it to the inside to make another counter fold, these little diamond shaped folds are where the glue will be applied. 

Two contrasting folded pieces can be fit together loosely before using a hot glue gun to work one section at a time. It is a little tricky, so be patient. I find it is a little more sturdy if one of the pieces is made of cardstock.

The pieces won't fit perfectly, but don't sweat it. The more of them you make, the more consistent the angles of your folds will be.  I ended up hot gluing a bead to the top of each ornament to string a loop of twine or yarn. I can't wait to see them all hanging from a tree!









 

Homemade Moravian Star

As a native of Pennsylvania Dutch country, I grew up seeing Moravian Stars shaped lights hanging from porch stoop roofs and I have never stopped loving them. The Moravians were a Christian religious church that is about 500 years old and began in the the Czech Republic. The famous star, was said to have been born out of a geometry lesson at a Moravian boy's school in Germany in 1830. The Moravians settled places like Bethlehem and Nazareth, PA, and brought with them, their stars. They have become associated with the the Christmas season (Star of Bethlehem), but a lot of people hang these stars year round. I'm not sure if original star probably had 20 points or 26 but I was thrilled to find a template to make my own star from paper on lovelyetc.com

This tree topper actually has 19 points because there is a hole where the final point is missing, and that's the place where you can slide it onto the top of a tree. Each point is a pyramid of 3 triangles, each with a 2.5" base and 3.5" sides. There are 2 flaps on the bottom and one on the side. I used card stock of various colors and some patterned paper to cover most of the pyramids (before assembling). A strip of hot glue is all it takes to make each pyramid. 

You start with 5 pieces each attached on 2 sides to make a 5 pointed star. Each pyramid base will be attached at two sides.

The second layer will require a pyramid to be added at each of the remaining sides of the original star. Because each of those pyramids will have two remaining sides, there are a total of places to attach the next 5 pyramids. The 3rd layer will zig zag. You'll glue two sides of a new pyramid between each of the 2nd layer. The 4th and final grouping will fill in the final 5 pyramids at the bottom like the star of 5 at the top. Unless, like me, you'll need to leave a hole to make it a tree topper, in which case, you only add 4 pyramids. This picture, of my second star (this time I used glittery gold card stock) shows what it will look like after adding the 3rd group of 5 pyramids. You will have 5 tabs (or places to put a tab from another pyramid) at the opening.

I made more than one mistake my first try so I had to keep reminding myself to have pyramids coming together to make a star in every direction. Just play around and don't lose your temper, it will all work out. I cut a few little rectangles to make a tab on each side for the places where I had to cut them apart to add an extra pyramid here and there. 

I wasn't crazy about the little gaps that were left at the intersections, so I hot glued little beads to fill the holes. and I think the stars turned out really cute. I can't wait to see perched on a tree,  or a mantle.

For detailed instructions AND free template use this link below. Thank you, Carrie at Lovely etc.

https://www.lovelyetc.com/diy-christmas-tree-star/